E-Bench Bench KH 2222 Operating Instructions Manual
                | |
Contents | 
8 KH 22226. Preparing theSurround SoundSystem for Operation6.1. Unpacking the components1 Remove the components of the surround sound system• 1 bass reflex active subwoofer with power cord• 1 center speaker with integrated receiver• 2 front speakers• 2 rear speakerscarefully from the packaging.2 Then remove the accessories from the packaging• 1 data cable (3 metres) to transmit signals between thecenter speaker and the subwoofer• 1 speaker cable (3 meters) to connect the center speak-er to the subwoofer• 2 speaker cables (each 4 meters) to connect the frontspeakers to the subwoofer• 2 cables (each 8 meters) to connect the rear speakersto the subwoofer• Infrared remote control• 2 batteries6.2. Preparing the remote control foroperation1 Open the battery compartment on the back of the re-mote control and remove the cover of the battery.2 Now put in two batteries type AAA/LR 03 (round cells,not included in the scope of supply) into the batterycompartment. Take care that the batteries are insertedwith the correct polarity.3 Put the cover of the battery compartment back on tothe back of the remote control.Replacing the batteries:If the surround sound system cannot be operated prop-erly or cannot be operated any longer with the remotecontrol, then the batteries have to be replaced. Always re-place both batteries, in order to be able to use the remotecontrol at full capacity again.Note:Do not dispose of used battery in household waste!Throw away used batteries at a waste collection or dis-posal point or there, where you bought the batteries.If you should want to dispose of the remote control ofthe surround sound system itself, then you have to re-move the batteries beforehand!To guarantee that the remote control operates perfectly:• Always point the remote control at the center speaker• Ensure that there are no obstacles between the remotecontrol and the center speaker which prevent reception• Do not move more than 5 meters away from the centerspeaker when using the remote control. Disturbancescould otherwise arise when operating the surroundsound system with the remote control.6.3. Positioning the speakers and thesubwooferThe speakers should be positioned as follows to providean optimal sound:• Front right and left speaker on the right and left of thetelevision or your listening position• Center speaker in the middle between the front leftand right speaker• Rear right and left speaker on the right and left behindyour listening position• Subwoofer: The human ear cannot locate the lowtones of the subwoofer. Therefore the installation loca-tion of the subwoofer is optional.6.4. Connect speakers and subwooferUse the three shorter speaker cables to connect• the center speaker and• the front right and left speaker to the subwoofer.Use both the long speaker cables to• connect the rear right and left speakers to the sub-woofer.Note:The four small speakers are identical. You can use any ofthese speakers as front or rear speaker.Use the data cable to connect the center speaker to thesubwoofer.1 To connect the front and rear speakers insert• the end of the grey leads of the speaker cable into thered terminal and• the end of the black lead of the speaker cable into theblack terminal on the back of the loudspeaker.2 Then insert |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine