E-Bench Bench KH 2222 Operating Instructions Manual
                | |
Contents | 
9KH 2222• the end of the grey lead of the speaker cable into thered terminal and• the end of the black lead of the speaker cable into theblack terminal on the back of the subwoofer.Insert the individual speaker cables into the followingterminals:• the cable of the front right speaker into the terminalmarked FR• the cable of the front left speaker into the terminalmarked FL• the cable of the center speaker in the terminal marked C• the cable of the rear right speaker into the terminalmarked SR• the cable of the rear left speaker into the terminalmarked SL3 To connect the center speaker to the subwoofer: In-sert the data cable into the DISPLAY LINK jack on theback of the subwoofer. Then tighten both screws onthe plug. Insert the other end of the data cable intothe jack on the back of the center speaker. Lastly alsotighten both screws on the plug.4 Now insert the power cord of the subwoofer into apower socket.5 Switch the power switch on the back of the subwooferto ON. STANDBY/MUTE will appear in the display of thecenter speaker.6.5. Connecting the surround soundsystem to audio/video equipmentYou have the following options in using the surroundsound system:A Playback of 5.1 channel surround sound on DVDs be-ing equipped accordingly. For this purpose the sur-round sound system has to be connected to a DVDplayer, which has• a DTS and/or AC3 decoder and• six cinch audio outputs for front and rear speakers,center speakers and subwoofer.B Playback of simulated 5.1 channel surround sound ifthe audio/video devices connected only have stereosound. This is made possible by using the so-called“Q SOUND”.C Playback of stereo sound from a connected audio/video device.The following audio/video equipment can be connectedto the surround sound system:• Television• Video recorder• DVD player• Hifi system• Computerand other comparable devices. Audio/Video equipmentcan be connected to the surround sound system in the fol-lowing ways:... Connection via . channel/audiooutputsIf you would like to play back 5.1 channel surround sound(from a DVD which has been equipped accordingly), theDVD player must have 6 cinch jacks as audio outputs.These are mostly marked with “5.1 Audio Out”, “5.1 Ch Au-dio Output” (or similar). All six cinch jacks are also markedwith the audio channel, whose signal they output. Themarkings are mostly:• “C”, “Center” or similar for the center speaker• “FL”/“FR”, “Front L”/“Front R” or similar for the frontspeakers:• “SL”/”SR”, “Rear L”/”Rear R” or similar for the rear speakers• “SW”, “Subwoofer” or similar for the subwooferNote:Please note that not all DVDs offer 5.1 channel surroundsound. You can find information on this mostly on theDVD cover, on the DVD itself or the enclosed booklets.1 Insert one cinch cable each (not included in the scopeof supply, can be bought in specialized audio/videoshops) in each of the six cinch jacks of the DVD playerto be connected.2 Insert the other end of the cinch cables into the corre-sponding cinch jacks on the back of the subwoofer:• the cable for the center speaker in the jack marked C• the cable for the front left speaker in the jack marked FL• the cable for the front right speaker in the jack marked FR• the cable for the rear left speaker in the jack marked SL• the cable for the rear right speaker in the jack marked SR• the cable for the subwoofer in the jack marked SWIt may perhaps be necessary to adjust the settings in theinternal menu of the DVD player, so that the sound play-back works properly with the surround sound system. Incase of doubt consult the operating instructions of theaudio/video equipment.... Connection via two cinch jacks asaudio outputIf the audio/video device to be connected to the surroundsound system only has two cinch jacks: |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine