EAE ORIA Product Manual
                                                  | |
Contents
| 
Product Manual Oria ThermostatEAE KNX Oria Thermostat Oria Thermostat PM R1.0©EAE Technology www.eaetechnology.com Sayfa 19 / 50PushButton1- long -value[temperature]Send 4 byteDPT 14.068CWTEnabled when “Long Press Data Type” selected as “4 byte value [floating point]PushButton1- long -value[0…4294967295]Send 4 byteDPT 12.001CWTEnabled when “Long Press Data Type” selected as “4 byte value [0…4294967295]”Table 144.2.2 Push ButtonsNumber of rockers should be selected in “General” tabs in parameters and should be chosen as compatiblewith the device that will be configured. Push buttons are numbered from top to bottom – right to left, topmostright push button as push button 1, near it push button 2, and so on. Push buttons can be configured as 4different operations and 1 function to disable push button (No Function). Operation selection can beconfigured from “Push Button N” (N: Push button number) tab, visible when “Rocker Operation” selected as “2Push Buttons”. Every function enables different parameters and communication objects that will be explainedin the following chapters.Parameter Setting DescriptionPush Button Function No Function Disables the push buttonSwitch Push buttons can be used to sendon/off telegrams. (For moreinformation Chapter 4.2.2.1)Switch and Dim Push buttons can send on/off anddimming telegrams. (For moreinformation Chapter 4.2.2.2)Shutter Push button can control shutter,venetian blind, blind, roller andawning. (For more informationChapter 4.2.2.3)Value Operation Push button can send predefinedvalues from different data types.(Refer Section 4.2.2.4)Table 15Push buttons also have status LEDs which can be configured to indicate state of the operation that isconfigured.4.2.2.1 SwitchSelecting “Switch” as “Push Button Function“ enables to send 1 bit On(1)/Off(0) telegrams to the group addressthat is linked to respective communication object. Pressing and releasing buttons can be assigned to differentcommands (On, Off, Toggle and No Command). Status LEDs can be configured to notify the current status of |
Related manuals for EAE ORIA
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine