Installation InstructionsUB80 BRACKETEAW DWG NO 480351 (0)1. InventoryBefore beginning installation, inventory kit to items listed.Item EAW P/N Qty Description1 606018 1 Bracket2 102246 2 Screw, 3/8-16 x 1-1/2 SHCS, Black3 105062 2 Washer, Neoprene, 3/8 I.D. X 1 O.D.4 105010 2 3/8 Washer, Flat, Black5 105011 2 3/8 Washer, Lock, BlackWARNING: Installation should only be done by an experienced technician. Improper installation may causeserious injury. The surface where the bracket/cabinet is to be fastened must have enough structural integrityto support 250 pounds.2. Mounting the BracketDue to various construction methods and materials used today, the hardware for securing thebracket to the mounting surface is not supplied. It is recommended that you consult a buildingprofessional for the proper mounting hardware before mounting the bracket.3. Removing the Shipping HardwareRemove the flat head screws from the sides of the cabinet using a 7/32 Allen wrench.4. Which Holes to UseThere are two holesin each bracket arm.Use the inner hole.5. Hanging the CabinetA. Holding the cabinetin position, insertthe screw with itslock washer andflat washer, throughthe bracket’s rightside arm innerhole then throughthe neoprene washerand into the cabinet’sthreaded mounting holeand hand tighten.B. Repeat step A through theleft side arm’s bracket hole.C. Position cabinet and tightenboth screws with a 5/16Allen wrench.EASTERN ACOUSTIC WORKS1 Main Street • Whitinsville, MA 01588 • Phone (800) 992-5013 • FAX (508) 234-8251343 42(2) NEOPRENE WASHERSEAW P/N 105062MOUNTING BRACKETUB80 EAW P/N 606018(2) SCREW 3/8-16 X 1-1/2SHCS 18-8 BLKEAW P/N 102246(2) LOCK WASHER 3/8EAW P/N 1050113.00(2) FLAT WASHER 3/8EAW P/N 105010UB804.564.564.56 20.143X Ø.31 THRU