INSTALLATIONEaton 5115 Rack-Mount UPS (500–1500 VA) User's Guide 164201449 Rev B www.eaton.com/powerquality32Wall-Mount SetupTo mount the UPS to a wall using the supplied hardware:1. Place the UPS on a flat, stable surface with the front of the UPSfacing toward you.2. Attach four mounting brackets to the UPS as shown in Figure 14.Secure the short end of the mounting bracket to the UPS using twoof the supplied M3 6 screws.W A R N I N GThe UPS MUST be positioned with the front cover at the top to prevent a battery hazard.3. Secure the UPS to the wall using one bolt in each mounting bracketas shown. Select the bolt according to the wall type.WallFigure 14. Mounting the UPS to a Wall
