Eaton 9E1000i Manual
Also see for 9E: Installation and operation manualInstallation and operation manualInstallation and operation manualInstallation and operation manualManual
                      |
Page 93.Installation3.1 Unpacking1. Cut the straps and carefully remove the cardboardbox by sliding it upwards.2. Remove the accessory box, the wooden slide and thetop polystyrene foam corner pieces.3. Remove the bottom polyethylene corner pieces byrotating them as shown in the figure.4. Open the protective bag and pull it all the way down.5. Put the previously removed slide on the back part of thepallet (see figure). Make sure that the slide rests firmlyagainst the pallet so it remains in place during unloadingoperations. Pull the UPS from the front with caution whensliding it off the pallet.NOTE: All parts of the packaging should be kept for futureuse.3.2 Package contentAfter opening the packaging, it is first necessary to check the contents.The package must contain:UPS USB cable RS232 cable Jumper(15/20kVA models only) User manual Software CD |
Related manuals for Eaton 9E
manualsdatabase
Your AI-powered manual search engine