Eaton 9SX Series Installation And User Manual

Also see for 9SX Series: Manual Manual

Page 31614-20306-00 - 9SX 0-6 KVA EMEA_EN4. Interfaces and Communication4.3 Display functionsPress the Enter ( ) button to activate the menu options. Use the two middle buttons ( and ) to scrollthrough the menu structure. Press the Enter ( ) button to select an option. Press the button to cancel orreturn to the previous menu.Main menu Submenu Display information or Menu functionMeasurements [Load] W VA A pf / [Input/Output] V Hz / [Efficiency] % /[Battery] % min V n° [Battery remaining life] months /[Average power usage] Wh / [Cumulated power] WhControl Go to Bypass Transfers the UPS on Bypass modeLoad segments On/Off Commands the load segmentsStart battery test Starts a manual battery testConnectivity test Tests dry contact relay outputs and relay card contacts.Simulates line failure and battery lowFunction reset Clears active fault, power usage, battery remaining life, resetNMC, Restore factory settingsSettings Local settings Sets product general parametersIn/Out settings Sets Input and Output parametersOn/Off settings Sets On/Off conditionsBattery settings Sets battery configurationCom settings Sets communication parametersEvent log Event filter Selects faults, alarms and/or events to displayEvent list Displays the events storedReset event list Clears eventsFault log Fault list Displays the faults storedReset fault list Clears faultsIdentification [Product type/model] / [Part/Serial number] / [UPS/NMCfirmware] / [Com card IPv4], [Com card IPv6], [Com card MAC]Registration Links to Eaton registration website4.4 User settingsThe following table displays the options that can be changed by the user.Submenu Available settings Default settingsLocal settingsLanguage [English] [Français] [Español][Português] [Simplified Chinese][Italiano] [Deutsch] [Русский] [Japanese]Menus, status, notices and alarms, UPSfault, Event Log data and settings are inall supported languages.[English]User selectable when UPS ispowered for the first time.Date / time Format:[International] [US][International]LCD Modify LCD screen brightness andcontrast to be adapted to room lightconditions.Audible alarm [Enabled] [Disabled on battery] [Alwaysdisabled]Enable or disable the buzzer if an alarmoccurs.[Enabled]Level: [High] [Low] [High]Protected access [Enabled] [Disabled]Password is: 0577[Disabled]