Eaton ATC-100 Instructional Booklet

Also see for ATC-100: Instructional booklet Operation & maintenance manual

Contents

Instructional BookletPage 26 Effective: March 2010O & M Manual for theATC-100 Breaker Based Transfer SwitchFor more information visit: www.eaton.com IB01602018E6.2 Problem SolvingHAZARDOUS VOLTAGES IN AND AROUND ATS EQUIPMENT DURINGTHE PROBLEM SOLVING PROCESS CAN CAUSE SEVERE PERSONALINJURY AND/OR DEATH. AVOID CONTACT WITH ANY VOLTAGESOURCE WHILE PROBLEM SOLVING.ONLY PROPERLY TRAINED PERSONNEL, FAMILIAR WITH THE ATSEQUIPMENT AND ITS ASSOCIATED EQUIPMENT, SHOULD BE PERMIT-TED TO PERFORM THE PROBLEM SOLVING FUNCTION. IF AN INDI-VIDUAL IS NOT QUALIFIED TO PERFORM THE PROBLEM SOLVINGFUNCTION, THE INDIVIDUAL SHOULD NOT ATTEMPT ANY OF THESEPROCEDURES.A basic problem-solving effort is the first step to take prior to call-ing for assistance. Frequently, the effort will successfully addressmost problems encountered. The problem solving procedure ispresented in the Troubleshooting Guide (Table 3, Section 5 ofATC-100 Controller Instruction Booklet IB01602019E). Remem-ber, only qualified individuals familiar with the ATS equipment andthe system in which it is applied should attempt these problemsolving procedures.If a problem persists after having completed the problem solvingprocedure, contact a Eaton representative for further assistance.When calling for assistance, the following is the minimum informa-tion required to properly address the need:1. Style number of ATS, if applicable;2. Catalog number of ATS;3. Actual location of the ATS (type of facility, address, etc.);4. Company name and name and position of individual represent-ing company;5. Basic description of the situation as it exists; and6. Any results of the problem solving steps taken and/or read-ings taken.Section 7: Adjustments7.1 GeneralRefer to I.B.01602019, supplied with the ATS for ATC-100 Con-troller adjustments and programming.WARNINGWARNING