Eaton BG2I Technical Manual

2 Call point BG2i & BG2W January 2024 www.eaton.comCall Point BG2I & BG2WEnglish4.0 MaintenanceDuring the working life of the unit, it should require littleor no maintenance. However, if abnormal or unusualenvironmental conditions occur due to plant damage oraccident etc., then visual inspection is recommended.If a unit fault should occur, then the unit can be repairedby MEDC. All parts of the unit are replaceable.If you acquired a significant quantity of units, then itis recommended that spares are also made available.Please discuss your requirements with the Technical SalesEngineers at MEDC.5.0 Special conditions for safe use1. The apparatus has a plastic enclosure which must onlybe cleaned with a damp cloth to avoid the danger ofignition due to a build up of an electrostatic charge2. The apparatus must only be fitted with approved Exe glands and blanking plugs that will maintain theingress protection to at least IP6X6.0 Certification/approvalsATEX / UKEX unitsEx ia unit (ATEX certification No. Baseefa03ATEX0084X)(UKEX certification No. BAS21UKEX0546X)Ex ia IIC T4 Ga (-40°C ≤ Ta ≤ +70°C)Ex ia IIIC T135°C Da (-40°C ≤ Ta ≤ +70°C)The ATEX / UKEX certificate and the product label carrythe ATEX / UKEX group and category marking:II 1 GDWheresignifies compliance with ATEX / UKEXII signifies suitability for use in surface industries1 signifies suitability for use in a zone 0 areaG signifies suitability for use in the presence of gasesD signifies suitability for use in the presence of dust