Eaton C441 Series User Manual

Also see for C441 Series: User manual

Contents

PROFIBUS Diagnostic Telegrams40 C441 PROFIBUS Module User Manual MN042002EN—July 2015 www.eaton.comS611 Soft StarterTable 29. S611 Diagnostic TelegramByte Bit Description Ext Diag Bit Notes1 0 Diag.station: Station does not exist (set by Master) Default Diagnostic Data1 Diag.station_not_ready: Station is not ready for data exchange2 Diag.cfg_fault: Configuration data does not agree3 ext.Diag: Slave has high priority extended diagnostic data4 Diag.not_supported: Requested function is not supported5 Diag.invalid_slave_response: Sets slave to 0, fixed6 Dig.prm_fault: incorrect parameterization7 Diag.master_lock: Slave is parameterized by different master2 0 Diag.prm_req: Slave has to be re-parameterized1 Diag.stat_diag: Static diagnosis2 Fixed at 13 Diag.WD_on: Threshold monitoring activated4 Diag.freeze_mode: Freeze command received5 Diag.sync_mode: Sync command received6 Reserved7 Diad.deactivateed (sets master)3 0–6 Reserved7 Diag.ext_overflow4 Master address after parameterization (FF before parameterization)5 Ident Number (MSB)6 Ident Number (LSB)7 Header byte —Device Data Extended Diagnostic Data0 Length of User Ext Diagnostic Data123456 0 = Device Data7 0 = Device Data8 0 1 = Adapter Connected; 0 = Adapter Not Connected F/S1 Reserved2 1 = Adapter Married S/S3 Reserved4 Reserved5 Reserved6 Reserved7 Reserved9 8–15 Reserved10 16–23 Reserved