Eaton Char-Lynn Manual

Contents

3EATON Char-Lynn Power Steering Control Unit Series 5 Parts and Repair C-STCU-TS002-E1 November 2006GeneralInformationOrdering PartsHow to OrderReplacement PartsEach order must includethe following:1. Product Number2. Date Code3. Part Name4. Part Number5. Quantity of PartsRefer to specific part listingsfor your Char-Lynn® SteeringControl Unit when orderingreplacement parts. Listings areavailable from Eaton. Sampletag shows identification.For additional literature contactEaton Hydraulics at:14615 Lone Oak RoadEden Prairie, MN 55344http://hydraulics.eaton.comTools Required:• 10 mm Socket (13 mm Socketfor End-Ported Units)• 7/8 in. Socket• Torque Wrench(31 Nm [275 lb-in] Capacity)• Small Blade ScrewdriverSpecial Tools:• Plunger and Sleeve Tool (two-piece seal) No. 600801-001** Tools available—by special order—through our service department.ToolsPort FaceEaton Corp. Hydraulics Div.Eden Prairie, MN 55344Customer part numberor base unit number if ithas a column or valveassembledBar Code Label — Launch Date June, 1999Month / Day / YearEaton Part Number