Eaton Cooper Power Series Operation And Installation Instructions Manual

Also see for COOPER POWER SERIES: Installation and operation instructions Installation instructions Installation instructions Installation and operation instructions Operation instructions

Contents

Eaton Cooper Power Series Operation And Installation Instructions Manual Manual pdf 5 page image

1TYPE VSA12,VSA12B,VSA16,VSA20,ANDVSA20A O P E R ATIONANDINSTALLATIONINSTRUCTIONS MN280063EN May 2017Product informationIntroductionService Information MN280063EN provides installationinstructions, operating information, and testing proceduresfor Eaton’s Cooper Power™ series three-phase motor-operated reclosers.The information contained in this manual is organized intothe following major categories: Safety Information, ProductInformation, Specifications and Ratings, Dimensions andWeights, Installation, Accessories, Operation, and ServiceInformation.Read this manual firstRead and understand the contents of this manual and followall locally approved procedures and safety practices beforeinstalling or operating this equipment.Additional informationThese instructions cannot cover all details or variationsin the equipment, procedures, or process described norprovide directions for meeting every possible contingencyduring installation, operation, or maintenance. For additionalinformation, contact your Eaton representative.Acceptance and initial inspectionThis product is completely assembled, tested, andinspected at the factory. It is carefully calibrated, adjusted,and in good condition when accepted by the carrier forshipment.Upon receipt, inspect the carton for signs of damage.Unpack the control and inspect it thoroughly for damageincurred during shipment. If damage is discovered, file aclaim with the carrier immediately.Handling and storageBe careful during handling and storage of this equipment tominimize the possibility of damage. In particular, protect thebushings and control equipment.If the unit is to be stored for any length of time beforeinstallation, provide a clean, dry storage area. If the recloseris to be stored in a humid atmosphere, make provisions tokeep the cabinet heaters energized.ANSI® standardsThe VSA recloser is designed and tested in accordance withANSI® standards: C37.60 and C37.85.Quality standardsISO 9001 certified quality management systemDescriptionA complete assembly consists of the recloser control unit,the vacuum interrupter assemblies, and the operatingmechanism housing.Recloser tripping employs stored spring energy. When thetrip solenoid is actuated by the 24 Vdc trip signal, the storedspring energy is released to open the recloser. The 24 Vdctrip signal is originated at the recloser control. The 240 Vdcsupply is not required to trip the recloser. An external 240Vac source is required to operate the drive motor. A 120 Vacinput power supply accessory is also available.Type VSA reclosers are electronically controlled by Eaton’sCooper Power series recloser controls.