Eaton Crouse-Hinds GHG 514 Operating Instructions Manual

Contents

7EATON’s Crouse-Hinds BusinessGBExplosion-protected plugs and sockets63A, GHG 514Code Zone 1Dimensions in mmX = fixing dimensions1 Technical data1.1 Plug and socket GHG 514Marking acc. to 2014/34/EU and standard:EN 60079-0 D II 2 G Ex de II C T6D II 2 D Ex tD A21 IP66 T 80°C**ATEX type examination certificate: PTB 00 ATEX 1070Rated voltage: up to 690 V, 50/60 HzRated current: max. 63 ABack-up fuse: without thermal protection max. 63 Awith thermal protection max. 80 A gLSwitching capacity AC 3: up to 690 V / 63 APerm. ambient temperature:Special versions permit deviating temperatures.-20° C to +40° C (catalogue version)Perm. storage temperature in original packing: -20° C to +40° C**Protection category acc. to EN/IEC 60529with closed and secured hinged cover as wellas combinations properly plugged together IP 66 (catalogue version)Insulation class acc. to EN/IEC 61140: I - is complied with by the devicesCable entry: (catalogue version)wall socket 1x M50 + 1x blanking plug M50suitable cables and test torques of thepressure srew Ø Nmseel 1+2 1 2 min.max. (1)(2)24.028.06.07.0seel 2 1 2 min.max. (2)28.035.05.07.0Test torque for screw in thread cable entry (Nm) 7.5(1) The maximum clamping area for cables with the seal combination 1+2 can vary according to the typeof cable used.(2) When selecting the seal rubber, ensure that the pressure screw can be tightened when carrying out anyfuture maintenance work on the cable entry.plug Ø 19 - 34 mmSupply terminal:wall socketplugCross section2 x 4 - 25 mm²(with cable lugs 1 x 35 mm²)1 x 4 - 16 mm²(with cable lugs 1 x 25 mm²)Stripped wire length19 mm12 mmTest torques:Cover screws 2.50 NmTerminals, plug 2.40 NmTerminals, wall socket 3.50 NmSelf-cutting screws size 4 2.00 NmSelf-cutting screws size 5 3.00 NmSelf-cutting screws size 8 3.50 NmWeight: (catalogue version)wall socket 4-pole GHG 514 44 approx. 8.10 kgplug 4-pole GHG 514 74 approx. 0.75 kgwall socket 5-pole GHG 514 45 approx. 8.15 kgplug 5-pole GHG 514 75 approx. 0.80 kgAuxiliary contact:Rated voltage: 690 V VACRated current: 20 ASwitching capacity: AC 15 400 V / 6 ADC 13 24 V / 2 A3-pol. + PE3-pol. + N + PEWall socket,4- and 5-polePlug,4- and 5-pole