7EATON’s Crouse-Hinds BusinessGBExplosion-protected plugs and sockets 125 A, GHG 515Code Zone 1Dimensions in mmX = fixing dimensionsWall socketPlugGHG 515, 5-pole 50/60Hz220-250V 380-415V 500V 690Vblue red black blackw/o auxiliary contact with auxiliary contact3-pole + PE 3-pole +N + PEGHG 515, 4-pole 50/60Hz220-250V 380-415V 500V 690Vblue red black black4-pole5-pole1 Technical data1.1 Plug and socket GHG 515Marking acc. to 94/9/EC: D II 2 G Ex de II C T6D II 2 D Ex tD A21 IP66 T 80°C**EC type examination certificate: PTB 01 ATEX 1069Rated voltage: up to 690 V, 50/60 HzRated current: max. 125 ABack-up fuse: max. 125 A gL without thermal protectionmax. 160 A gL with thermal protection (therm.protection set to 125A)Switching capacity AC 3: up to 690 V / 125 APerm. ambient temperature:Other temperatures possible for special versions.-20° C to +40° C (standard version)Perm. storage temperature in original packing: -20° C to +40° C**Protection category acc. to EN/IEC 60529with closed and secured hinged cover as wellas combinations properly plugged togetherIP 66 (catalogue version)Insulation class acc. to EN/IEC 61140: I - is complied with by devicesCab,le entry: (standard version)Wall socket 2 x M63 (Ø 29- 41 mm)suitable cables and test torques of thepressure srewØ Nmseel 1+2 1 2 min.max. (1)(2)29.035.012.012.0seel 2 1 2 min.max. (2)36.041.012.013.0Test torque for screw in thread cable entry 7.5 Nm(1) The maximum clamping area for cables with the seal combination 1+2 can vary according to the typeof cable used.(2) When selecting the seal rubber, ensure that the pressure screw can be tightened when carrying out anyfuture maintenance work on the cable entry.Plug Ø 21-48 mm (Ø 31-58 mm)Terminal:Wall socketPlug2 x 4 - 70 mm² (max 1x120 mm²)*1 x 4 - 35 mm² with pin cable lugs 1x50mm²* (use cable lugs supplied) Observe current load !Min. cross section / Supply terminalfor 100A rated currentfor 125A rated currentWall socket1x 50 mm²1x 70 mm²Plug1x 35 mm²1x 50 mm²Test torques:Cover screws 2.5 NmTerminals, plug 4.5 NmTerminals, wall socket 6.0 NmSelf-cutting screws size 5 3.0 NmWeight (standard version): 4-pole 5-poleWall socket ca. 12.30 kg ca. 13.00 kgPlug ca. 0.90 kg ca. 1.20 kgAuxiliary contact:Rated voltage: 690 V ACRated current: 20 ASwitching capacity: AC 15 400 V / 6 ADC 13 24 V / 2 AContact arrangement