Eaton Crouse-Hinds Series Operating Instructions Manual

Also see for Crouse-hinds series: Operating instructions Instruction manual Operating instructions Operating instructions Instruction manual

Contents

Eaton Crouse-Hinds Series Operating Instructions Manual Manual pdf 7 page image

7Plug and socket system for industrial use 63 A,3-pole, 4-pole and 5-pole, GHG 524GBDimensions in mmX = fixing dimensions1 Technical data1.1 Plug and socket GHG 524Rated voltage UN up to 690 V, 50/60 HzRated current max. 63 ABack-up fusewithout thermal protection max. 63 A gGSwitching capacity AC 22Wall socket with switch 415 V / 63 A500 V / 63 A690 V / 63 APerm. ambient temperature -20° C to +40° C (catalogue version)(Special versions permit deviating temperatures)Perm. storage temperature in original packing -20° C to +40° CProtection category acc. to IEC/EN 60529with closed and secured hinged coverIP 66 (catalogue version)Insulation class acc. to IEC/EN 61140 I - is complied with by the devicesCable entries: (catalogue version)Wall socket with switch 1 x M50 + 1 x blanking plug M50suitable cables and test torques of thepressure screwØ NmSeal 1+21 2 3 min.max. (1)24.028.06.07.0Seal 11 2 3 min.max. (1)28.035.05.07.0Test torque for screw in thread cable entry 7.5 Nm(1) The tests of clamping ranges and torque values were performed with metal mandrel. The clamping range canvary by using cables with different manufacturing tolerances and material properties. Please use a suitablecombination of seals in the intermediate area, so that the cap nut can be tightened in future maintenancework on the cable entry.Wall socket without switch 3 x drilling M40 (2 x top, 1 x bottom)incl. 1 x enlargement gland M50Plug / Coupler Ø 19 - 28 mmSupply terminal: Cross section Stripped wirelengthWall socket with switch 1 x 2.50 - 25 mm²(with cable lugs 1 x 35 mm2)13 mmWall socket without switch 1 x 2.50 - 35 mm² 12 mmPlug 1 x 4.00 - 16 mm²(with cable lugs 1 x 25 mm2)12 mmFlange socket / Coupler 1 x 2.50 - 35 mm² 12 mmTest torques:Cover screws 2.5 NmTerminals 4.5 NmSelf-cutting screws size 4 2.0 NmSelf-cutting screws size 5 3.0 NmSwitch connection screw 2.0 NmWeight: (catalogue version) 3-pole 4-pole 5-poleWall socket without switch GHG 524 4. approx. 5.40 kg approx. 5.50 kg approx. 5.60 kgWall socket with switch GHG 524 2. approx. 1.80 kg approx. 1.90 kg approx. 2.00 kgPlug GHG 524 7. approx. 0.70 kg approx. 0.75 kg approx. 0.80 kgFlange socket GHG 524 8. approx. 1.20 kg approx. 1.30 kg approx. 1.40 kgInlet GHG 524 9. approx. 0.80 kg approx. 0.90 kg approx. 1.00 kgCoupler GHG 524 3. approx. 1.10 kg approx. 1.20 kg approx. 1.30 kgFlange socketDrilling template for flange socketsInletPlugCouplerWall socket without switchWall socket with switch