Eaton Cutler-Hammer 140D481G02R Instructions Manual

Eaton Cutler-Hammer 140D481G02R Instructions Manual Manual pdf 1 page image

I.L. 32-693 AThe user is cautioned to observe all recommendations,warnings and cautions relating to the safety of personneland equipment, as well as all general and local health andsafety laws, codes, and procedures.The recommendations and information contained hereinare based on Cutler-Hammer’s experience and judgment,but should not be considered to be all-inclusive or coveringevery application or circumstance which may arise. If anyquestions arise, contact Cutler-Hammer for further infor-mation or instructions.INSTRUCTIONS FOR MAGNUM DS TRIP UNIT TESTING USING TESTKIT SYLES 140D481G02R, 140D481G02RR, 140D481G03 AND140D481G04DANGERDO NOT ATTEMPT TO INSTALL OR PERFORM MAINTE-NANCE ON EQUIPMENT WHILE IT IS ENERGIZED. DEATHOR SEVERE PERSONAL INJURY CAN RESULT FROMCONTACT WITH ENERGIZED EQUIPMENT. ALWAYSVERIFY THAT NO VOLTAGE IS PRESENT BEFORE PRO-CEEDING WITH THE TASK AND ALWAYS FOLLOWGENERALLY ACCEPTED SAFETY PROCEDURES.CUTLER-HAMMER IS NOT LIABLE FOR THE MISAPPLI-CATION OR MIS-INSTALLATION OF ITS PRODUCTS.Effective September 1998, New InformationWARNINGDO NOT TEST THE TRIP UNIT WHILE THE BREAKERIS IN THE “CONNECTED” POSITION. BREAKER MUSTBE RACKED TO THE “TEST” POSITION, OR REMOVEDFROM THE SWITCHGEAR CELL.DO NOT USE TEST KIT STYLE 140D481G01 OR140D481G02 TO TEST A MAGNUM DS TRIP UNIT!DAMAGE TO THE TRIP UNIT WILL OCCUR.Test Kit Styles 140D481G01 and –G02, which cannot beused to test Magnum DS Trip Units, can be factory modi-fied to do so. This can be arranged by contacting theCutler-Hammer Switchgear Aftermarket Group at(800)BKR-FAST [800-257-3278].