Eaton VCP-W Instructions Manual

Also see for VCP-W: Instructions for installation, operation and maintenance Operation Manual

Eaton VCP-W Instructions Manual Manual pdf 1 page image

I.L. 5229B79H05Effective 06/2014Instructions for the Type VCP-W 27 kV Simple Manual Ground andTest DeviceFigure 1 Type VCP-W 27 kV Manual Ground & TestDeviceTABLE OF CONTENTS1-1 Introduction ..................................................... 11-2 Description ...................................................... 11-3 Operation ........................................................ 21-3.1 Safe Practices ................................................. 2Available Style Numbers & OptionsSTYLE NUMBER DESCRIPTION1C94354G01………..1200/2000A Top & Bottom1C94354G11………..1200/2000A Top & Bottomwith Direct Roll-On-Floor(ROF) wheels installed**Roll-On-Floor option requires breaker cell to bea Direct-Roll-In cell.WARNINGREAD AND UNDERSTAND THESE INSTRUCTIONSBEFORE ATTEMPTING TO USE THIS DEVICE.IMPROPER USE CAN RESULT IN DEATH, BODILYINJURY AND/OR PROPERTY DAMAGE.CAUTIONBECAUSE OF THE UNIQUE APPLICATION ANDVAST VARIETY OF SYSTEM AND USERREQUIREMENTS, SPECIFIC OPERATINGPROCEDURES MUST BE DEVELOPED BY THEUSER. FAILURE TO DEVELOP THESEPROCEDURES COULD LEAD TO IMPROPER USEOR OTHER MORE SERIOUS CON-SEQUENCES.1-1 INTRODUCTIONType VacClad-W switchgear assemblies aredesigned with all the bus work completely insulatedfor safety. Since the current carrying parts are notreadily accessible, the Type VCP-W Simple ManualGround and Test Device is designed for insertion intothe breaker compartment to gain access to theprimary stationary contacts. It provides a convenientmeans to:1. Ground a circuit for maintenance work;2. Apply potential for cable testing; and,3. Access both bus and line circuits for “phasingout” tests.1-2 DESCRIPTIONThe device consists of a drawout element that can beinserted into a circuit breaker compartment in thesame manner as a Type VCP-W Circuit Breaker. Itincludes six terminals and ground bus connections.Each terminal is isolated from each other and the busconnection by insulating barriers. The upper and lowerterminals are accessible by removing the respectivefront panel. The ground connection is located in thelower front section of the device.VacClad-W switchgear is a two-high arrangement. Inthe lower compartment the top terminals normallyconnect to the main bus and the bottom terminalsnormally connect to the incoming line or feeders. Inan upper

/ 4

Related manuals for Eaton VCP-W