Eaton Cutler-Hammer ELC Series Basic Training Manual

Also see for ELC-AN04ANNN: Instruction sheet

Software OverviewPC RequirementsIntro:PrefaceComponent RequirementOperating System Windows 95/98/2000/NT/ME/XPCPU Pentium 90 and aboveMemory 16MB and above (32MB and above is recommended)Hard Disk Capacity: 50MB and aboveCD-ROM (for installing ELCSoft)Monitor Resolution Minimum: 640×480, 16 colors and aboveRecommended: 800×600Mouse Serial or Windows compatible mousePrinter Printer with Windows driverComm Port (1) RS-232, labelled COM1 - COM8Compatible Products All Eaton ELC seriesSupportServicesGo ChartExercise 2: LogicInstructionsExercise 1:Ladder LogicConnecting tothe ELCHardwareOverviewSoftwareOverviewBasics:Exercises:Installing the softwareInsert the provided CD-ROM into the proper drive on your PC. The install programshould automatically run.SoftwareOverviewPub. No. TR05003001E For more information visit: www.EatonElectrical.com 8