Eaton Cutler-Hammer PanelMate ePro PS 7685T-12 Series Replacement Procedures

February 2006 Page 1 of 9 01-50605-00Replacing the PanelMate® ePro PS, PanelMate ePro PS EE, andPanelMate ePro PS OD 7685x-12 Series Backlight AssemblyIntroductionThe Backlight Replacement Kit provides a replacement backlight for the PanelMate ePro PS 7685T-12Series, the PanelMate ePro PS EE (Enterprise Edition) 7685T-12E Series, and the PanelMate ePro PSOD (Outdoor) 7685T-12OD Series. Although the figures provided are for the ePro OD models, thedisassembly for the ePro PS and ePro EE models are the same.Contents• Tywrap• Backlight• Disposable Anti-static Wrist StrapCaution: Electrostatic Discharge (ESD) can damage static-sensitive electronic components. Youshould perform these procedures only at an ESD workstation. If an ESD workstation is notavailable, you can provide some protection by wearing an anti-static wrist strap andattaching it to a metal part of the system chassis.Warning: This procedure requires electrical and mechanical skill and should be attemptedonly by qualified technicians.Required Tools• Phillips screwdriver size P0 and P1. Magnetic would be helpful.• Nut Driver or socket size ¼”• Jewelers small phillips screwdriver. Magnetic would be helpful.• Small electronic cutters