Eaton EATS16N Installation And User Manual

Also see for EATS16: Installation and user manual Installation and user manual

Contents

SAFETY INSTRUCTIONSSAVE THESE INSTRUCTIONS. This manual contains important instructionsthat should be followed during installation and maintenance of the ATS.The EATON ATS models that are covered in this manual are intended for installationin an environment within 0°C to 40°C (32°F to 104°F) and free of conductive contaminant.Certification standards• Safety: IEC 62310-1• EMC: IEC 62310-2• Performance: IEC 62310-3• CE Mark• Additional conformances :- IEC 60950-1- CISPR 22 Class BImportant safety notes• Only qualified personnel can service this equipment.• Follow the following precautions when working on this unit.- Remove watches, rings, or other metal objects.- Use tools with insulated handles.• Examine the packing container. Notify the carrier immediately if any damage is present.• Do not disassemble the unit.• Do not operate the unit near water or in an area with excessive humidity.• Keep liquid and foreign objects from getting inside the unit.• Do not operate the unit close to gas or fire.• Verify whether the branch circuit breaker or fuse on service feed is correct.• Verify line voltage requirements and the supplied line voltage prior to installation.• This unit is supplied from multiple sources, disconnect all sources before servicing.Electrical warnings• Check that power cords, plugs, and outlets are in good condition.• RAL equipment: "Equipment intended for installation in Restricted Access Location".Warning• Intended to be connected to computer load.• Not to be connected to inductive load or with >3:1 crest factor load.Page 2 EATS16_EN