Eaton EATS16N Installation And User Manual

Also see for EATS16: Installation and user manual Installation and user manual

Contents

1. IntroductionThe EATON Automatic Transfer Switch (ATS) is a high availability switch designed for providing redundantpower for sensitive equipment. It is powered by two independent power sources and automatically makesa rapid switch from one source to the other when the power supply used to power its connected load fails.This ATS is designed to be efficient and reliable.Users can know EATON ATS’s power flow, status, parameters from the LCD interface. Besides, theEATS16N unit has a network interface for users to read and write parameters. The network interface can beimplemented via the Ethernet protocol through an RJ45 connector.2. Presentation2.1 Weights and dimensionsRack installationW DHDescription Weights Dimensions H x W x D(kg / lb) (mm / inch)EATS16 3.32 / 7.31 43 x 438 x 250 / 1.7 x 17.24 x 9.84EATS16N 3.54 / 7.8 43 x 438 x 250 / 1.7 x 17.24 x 9.842.2. Rear panel layout - EATS16 - EATS16N3 3 4 1 Input Source 1: IEC C20 inlet1 22 Input Source 2: IEC C20 inlet3 Output: 8 x C13 10 A4 Output: 1 x C19 16 A2.3 Control panelThe ATS has three buttons on the control panel and a LCD display. It provides useful information about theATS itself, load status, events, measurements and settings.1 LCD panel2 Navigation: Scroll down button2 3 Navigation: Enter button51 3 4 Navigation: Escape button4 5 Transfer Test: Scroll down and Enterbuttons pressed for 5sPage 4 EATS16_EN