Eaton EBC-S User And Installation Manual

Eaton Small External Battery Cabinet (EBC-S)and Large External Battery Cabinet (EBC-L) User’s and Installation Guide© Eaton Corporation plc 2015. All rights reserved. Revision: 002 Document ID: P-164000504 20 (37)The following 24V shunt-release with early-make auxiliary contact isused with the above circuit breakers:TYPE ARTICLE NoNZM1-XAHIVL24AC/DC 259792(P-152001062)3.3 Unpacking and unloading the EBCWARNINGThe external battery cabinet is heavy. If the unpacking instructions arenot closely followed, the cabinet may tip over and cause serious injury.Do not tilt the cabinet more than 10 degrees from the vertical or thecabinet may tip over.For transportation purposes, the battery cabinet is bolted onto a woodenpallet. To remove the pallet, perform the following procedure:1. Before you unload the cabinetfrom the pallet, use a forklift orother material handlingequipment to move the cabinetto the installation area. Insertthe forks of the forklift betweenthe skids on the bottom of theunit.