8. Status IndicationsStatus IndicationsKEYON (---------) Indicator litOFF Indicator unlitSLOW ( - - - - ) Indicator slow flashing, buzzer slow pulsingFAST ( - - - - - ) Indicator fast flashing, buzzer fast pulsingSILENT Sounders off, buzzer offCONT Sounders on, buzzers continuousAny condition could be indicatedNormal Condition ON OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF Normal condition and at access level 1Access Level 2 ON FAST Access level 2 pass code acceptedFire Condition ON ON ON ON CONT CONT Only the zone in fire will have its zone fire indicator litSystem Fault ON ON ON SLOW Severe fault condition with the panelRepeater Fault ON ON SLOW SLOW There is a problem with the link betweenpanel and repeaterBattery Fault ON ON SLOW SLOW No battery voltage or battery voltage too lowMains Fault ON ON ON SLOW Mains voltage has been lostBattery Failure ON ON SLOW SLOW Battery impedance faultCharger Fault ON ON ON SLOW Charger voltage faultSounder Fault ON ON SLOW SLOW Short or Open circuit condition on the sounder circuitFRE Fault ON ON SLOW SLOW Short or Open circuit condition on the FREFPE Fault ON ON SLOW SLOW Short or Open circuit condition on the FPEZone Fault ON ON SLOW SLOW Short or Open circuit or head remova on the zoneSounder Disabled ON ON ON ALL fire alarm devices on ALL zones disabledFRE Disabled ON ON ON FRE disabledFPE Disabled ON ON ON FPE disabledZone Disabled ON ON ON Zone is disabled from fire detectionIndividual Zone Test Active ON ON ON SLOW An individual zone is in test mode and awaitinga fire activationPower ONGeneral FaultGeneral DisableRepeater Fault /System faultBattery Fault /Mains FaultBattery Failure /Charger FaultSounder Fault /Sounder DisabledSelf Test On \ TestFRE OnFRE Fault /FRE DisabledFPE Fault \FPE DisabledGeneral FireZone Fire (1-8)Detector Removed \ ZoneFault \ Zone DisabledFire Alarm DevicesPanel BuzzerCommentsConditionVisual Indications AudiableIndicationswww.acornfiresecurity.comwww.acornfiresecurity.com