Eaton Evolution 650/650 Rack 1UEvolution 850 Installation And User Manual

Also see for Evolution 650: Installation and user manual Installation and user manual Quick start guide Installation and user manual Installation and user manual

Contents

2. Installation86-81700-00EN A02 - Page 152.6 Equipment ConnectionsCheck that the indications on the name plate located on the back of the UPS correspond to the AC-power source andthe true electrical consumption of the total load.1. Connect the input power cord to the AC outlet receptacle.2. Connect the loads to the UPS outlets as shown. It is preferable to connect the priority loads to the two outletsmarked (3) and the nonpriority loads to the two programmable outlets marked (5).To program shutdown of outlets (5) during operation on battery power and thus optimize the available backup time,the EATON communication software is required.Evolution 650/850/1150 Evolution 155035Load55K6U.P.S.RAC OUTPUTI max 12AAC INPUTFAULTSITE WIRINGU.S. PAT. NO. 6,094,36336Vdc, 9AhPb21 Programmableor RS232ROO RPO35 LoadEvolution 650/850/1150 RackAC INPUTRS232Site wiring faultAC OUTPUTProgrammable21Pb55K6(E87247)RPO ROOoraLoadEvolution 1550 RackRS232 RPO ROO36Vdc, 9AhPbVolt 120V~1OAC InputW/VA 1100W/1440VAVolt 100/120/127V~1OAmps 12A MAXHertz 50/60 HzHertz 50/60 HzAC OutputAC INPUT1 2ProgrammableAC OUTPUTSITE WIRINGFAULTU.S. PAT. No. 6,094,36355K6U.P.S.RorI max 12AAmps 12.96/12/11.34AaLoad