Eaton FERRUPS Installation Manual

Also see for FERRUPS: User guide

BATTERY CABINET INSTALLATIONEaton FERRUPS Rack Mount UPS (850 VA–7 kVA) Installation Guide 164201425 Rev 1www.eaton.com/powerquality282. Assemble the frame that supports the battery cabinet as shown inFigure 6. Leave all bolts finger-tight until the frame is sized for therack.Attach two mounting brackets to the front of the frame using three1/4-20 1 hex-head bolts and nuts for each bracket. The front ofthe frame is the end with metal tabs.Attach two mounting brackets to the rear of the frame using two10-32 1/2 hex-head bolts and flat washers for each bracket.TabsFrame FrontFigure 6. Frame Assembly3. To ensure the front panel bolts align with the holes in the rack, usethe slot measurements in Figure 7 to position the frame before youattach it to the rack.19.0 (48.3 cm)1.5 (3.8 cm)4.0 (10.2 cm)3.0 (7.6 cm)4.0 (10.2 cm)1.5 (3.8 cm)14.0(35.6 cm)Figure 7. RBC-1 and RBC-2 Front Panel Bolt Slot Measurements