Eaton FT1455-L2 Operating Instructions Manual

Contents

4 EATON FT1455-L2 Hand Launcher Operating Instructions E-HOAI-CC002-E May 2015Insert projectile into the nozzle, close faceplate and secure bypushing the safety release bar forward confirming the releasebar locks into position. (See Figure 5, 6 & 7).Figure 5Figure 8Figure 7Figure 6Note: The safety release bar and faceplate must always be in the lockedposition prior to firing the launcher. Failure to secure faceplate and safetyrelease bar in the locked position may cause serious injury to the operator andor damage to the launch.Step 4: Air source connectionConnect a 1/2” I.D. air hose using the supplied Full Flow QuickConnect Coupling to the back of the launchers’ 5 micron air filteras shown. (See Figure 8).