Eaton JOCKEY Touch Quick Setup Manual

PANEL SETUPPress the Panel Setup button.This will will advance the screen to the PANEL SETUP screen 1/2.Jockey Pump ControllersTechnical Data MN081024ENQuick Setup Programming GuideEffective June 2015QUICK SETUPThe Quick Setup menu allows programming of the Time, Date, Start Pressure, Stop Pressure andMinimum Run Timer.NOTE: Before applying power to the controller, ensure the Motor Circuit Protector or Motor Overload Trip Setting are set to matchthe motor nameplate full load amps.STARTPress the MENU button on the top right of the Main Display Screen.This will advance the screen to the MENU 1/3 screen.QUICK SETUPPress the Quick Setup button.This will advance the screen to the Quick Setup screen for setting the Time of Day.SET TIMEThe time of day is set in 24 Hour format.Using the number buttons, enter the current time of day.Pressing the Arrow button will delete values one character at a time.Once the time of day is programmed, press the Next button.This will advance the screen to the Quick Setup screen for setting the date.Quick Setup programming instructions are continuedon the back of this page.*NOTE: If programming is interrupted for longer than oneminute, or the Cancel button is pressed during programming,all values entered in the Quick Setup program will return to thepreviously entered values. If the controller has no values entered(fi rst time setup), the values will return to the factory defaultsettings.(For details, download the JOCKEY Touch™ Operation Manualfrom our website: www.chfi re.com)

/ 2

Related manuals for Eaton JOCKEY Touch