Eaton KME6-1875-2 Installation Instructions Manual

Contents

iInstallatIon InstructIons MN280079EN May 2017DISCLAIMER OF WARRANTIES AND LIMITATION OF LIABILITYThe information, recommendations, descriptions and safety notations in this document are based on Eaton Corporation’s(“Eaton”) experience and judgment and may not cover all contingencies. If further information is required, an Eaton salesoffice should be consulted. Sale of the product shown in this literature is subject to the terms and conditions outlined inappropriate Eaton selling policies or other contractual agreement between Eaton and the purchaser.THERE ARE NO UNDERSTANDINGS, AGREEMENTS, WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WARRANTIESOF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY, OTHER THAN THOSE SPECIFICALLY SET OUT IN ANYEXISTING CONTRACT BETWEEN THE PARTIES. ANY SUCH CONTRACT STATES THE ENTIRE OBLIGATION OF EATON. THECONTENTS OF THIS DOCUMENT SHALL NOT BECOME PART OF OR MODIFY ANY CONTRACT BETWEEN THE PARTIES.In no event will Eaton be responsible to the purchaser or user in contract, in tort (including negligence), strict liability orother-wise for any special, indirect, incidental or consequential damage or loss whatsoever, including but not limited todamage or loss of use of equipment, plant or power system, cost of capital, loss of power, additional expenses in the use ofexisting power facilities, or claims against the purchaser or user by its customers resulting from the use of the information,recommendations and descriptions contained herein. The information contained in this manual is subject to changewithout notice.