Eaton NFX9000 User Manual

Contents

For Sales and Support, Contact Walker EMD • Toll-free: (800) 876-4444 • Tel: (203) 426-7700 • Fax: (203) 426-7800 • www.walkeremd.comNFX9000 Adjustable Frequency Drives1-4 For more information visit: www.EatonElectrical.com MN04002003EFebruary 2006Technical DataTable 1-2: NFX9000 SpecificationsDescription 115V 230VModel Number NFXF25A0-1 NFXF50A0-1 NFXF25A0-2 NFXF50A0-2 NFX001A0-2 NFX002A0-2Maximum Motor Output (hp) 0.25 0.50 0.25 0.50 1 2Maximum Motor Output (kW) 0.2 0.4 0.2 0.4 0.7 1.5Output RatingsRated Output Capacity (KVA) .6 1.0 .6 1.0 1.6 2.7Rated Output Current (A) 1.6 2.5 1.6 2.5 4.2 7.0Maximum Output Voltage (V) 3-phase corresponds to doubleinput voltage3-phase corresponds to input voltageRated Frequency (Hz) 1.0 – 400PowerRated Input Current (A) 6 9 4.9 6.5 9.7 9Input Voltage Tolerance 1-phase, 90 – 132V, 50/60 Hz 1-phase, 180 – 264V, 50/60 Hz 3-phase,180 – 264V,50/60 HzFrequency Tolerance ±5%Control CharacteristicsControl System SVPWM (Sinusoidal Pulse Width Modulation) carried frequency, 3 kHz – 10 kHzOutput Frequency Resolution .1 HzTorque Characteristics Starting torque can be 150% at 5 Hz including the auto-torque, auto-slip compensationOverload Endurance 150% of rated current for 1 minuteAcceleration/Deceleration Time .1 – 600 seconds (can be set individually)V/F Pattern AdjustableStall Prevention Level 20 – 200% of setting for rated currentOperating CharacteristicsFrequency Setting — Keypad Set by using ▲ and ▼ keys or PotentiometerFrequency Setting— ExternalSignalPotentiometer = 5 kΩ/.5W, DC0 to +10V (input impedance = 47 kΩ), 4 – 20 mA (output impedance = 250Ω)Digital inputs = 1 to 3 (three steps: JOG, UP or DOWN command)Communication settingOperation Setting — Keypad Set by using RUN/STOP keysOperation Setting — ExternalSignalRS-485 communication port; D1, D2, D3 and D4 can be combined to offer various modes ofoperationDigital input Signal Multi-step selection 0 to 3, jog, accel./decel. inhibit, first/second accel./decel. switch, counter,PLC operation, external base block (NC, NO) selectionMulti-function Output Signal Drive operating, frequency attained, non-zero speed, base block, fault indication, local/remoteindication and PLC operation indicationFunctionsMiscellaneous AVR, S-curve, overvoltage stall protection, DC braking, fault records, adjustable carried frequency,starting frequency setting for DC braking, over-current stall prevention, momentary power lossrestart, reverse inhibition, frequency limits and parameter lock/resetProtection Overvoltage, over current, undervoltage, overload, overheating, electronic thermal, andself-testingFiltration EMI filterCooling Forced airEnvironmentInstallation Location Altitude = 1,000m or belowKeep away from any corrosive gas, liquid and dustAmbient Temperature 14 to 104°F (-10 to -40°C), non-condensing and not frozenStorage Temperature -4 to 140°F (-20 to 60°C)Ambient Humidity Below 90% relative humidity (non-condensing)Vibration 9.80665 m/s2 (1G) at less than 20 Hz, 5.88 m/s2 (.6G) at 20 – 50 Hz