Eaton Night Falcon/UFLD Installation Instructions Manual

Eaton Night Falcon/UFLD Installation Instructions Manual Manual pdf 1 page image

INS #Brand Logoreversed out ofblackINS #IB506007ENWARNINGRisk of Burn – Disconnect power and allow fixture tocool before servicing.otee:N These instructions do not claim to cover alldetails or variations in the equipment, procedure,or process described, nor to provide directionsfor meeting every possible contingency duringinstallation, operation or maintenance. Whenadditional information is desired to satisfy aproblem not covered sufficiently for user’s purpose,please contact your nearest representative.otee:N This lighting fixture has been shipped completewith one of several mounting options. Please followthe installation instructions specific to the catalogpart that you ordered.otee:N Care must be taken not to set lighting fixture downon optical lenses or lift the fixture in the lens area.otee:N Specifications and dimensions subject to changewithout notice.WARNINGMake certain power is OFF before starting installationor attempting any maintenance.WARNINGRisk of fire/electric shock. If not qualified, consult anelectrician.WARNINGRisk of Electric Shock – Disconnect power at fuse orcircuit breaker before installing or servicing.WARNINGRisk of Personal Injury – Fixture may become damagedand/or unstable if not installed properly.●● Do not mount luminaire within 6” of a combustiblesurface.●● Do not handle luminaire by the glass. Do not touchLEDs.IMPORTANTe: Read carefully before installing fixture. Retain for future reference.Generale: Upon receipt of the fixture, thoroughly inspect for any freight damage which should be brought to the attentionof the delivery carrier. Compare the catalog description listed on the packing slip with the fixture label on the housing toassure you have received the correct material.Safetye: This fixture must be wired in accordance with the National Electrical Code and applicable local codes andordinances. Proper grounding is required to insure personal safety. Carefully observe grounding procedure underinstallation section.APPLICATIONSe: This lighting fixture is designed for outdoor lighting services, and should not be used in area of limitedventilation or inside high ambient temperature enclosures. It must be stored in a dry location prior to installation. Donot expose lighting fixture to rain, dust or other environmental conditions prior to installation and insertion of photocontrol or shorting cap (if so equipped). Do not install the fixture near combustible materials or locate next to airflowblocking surfaces within 6 inches. Best results will be obtained if installed and maintained according to the followingrecommendations.Installation Instructions – Night Falcon/UFLDInstructions d’installation – Night Falcon/UFLDInstrucciones de instalación de Night Falcon/UFLD