Eaton PXM4K Series Quick Start Manual

Also see for PXM4K Series: User manual Quick start guide

For detailed information concerning the operation and featuresavailable in the PXM4/6/8K Meter Display - 6” Color Touchscreen(PXM468K-DISP-6), please refer to PXM4/6/8K Meter ColorTouchscreen Display Features (IB150004EN) available on the Eatonwebsite (www.eaton.com/meters).Figure 1. Dimensions of the PXM4/6/8K Meter Display - 6” ColorTouchscreen (PXM468K-DISP-6).Installation1. Disconnect and lockout all power to the enclosure.2. Inspect the enclosure door to determine the best mounting loca-tion for the PXM4/6/8K Meter Color Touchscreen Display.otee:N A minimum clearance of 2.4 in. (61.0 mm) must be maintainedbetween the ventilation holes in the back of the display and any othercomponent within the enclosure.3. Use the mounting template to mark the cutout area on the enclo-sure door. Cut out the marked area.7.24(183.9)0.063~0.240(1.6~6.1)5.67(144.0)Effective January 2015Technical Data TD150015ENPXM4/6/8K Meter Color TouchscreenDisplay Quick Start GuideFigure 2. Cut Out Dimensions.4. Insure proper gasket placement on the PXM4/6/8K Meter ColorTouchscreen Display.5. Insert the PXM4/6/8K Meter Color Touchscreen Display throughthe cutout. Secure by finger tightening the supplied fasteners.Figure 3. Mounting the PXM4/6/8K Meter Display.6. Check for proper alignment of the PXM4/6/8K Meter ColorTouchscreen Display then torque fasteners to 6 lb-in. (0.7 N·m).ConnectionsTo use the PXM4/6/8K Meter Color Touchscreen Display, provide 24Vdc and connect the power cable between the Color TouchscreenDisplay and the PXM4/6/8K Meter.The display’s plug-in terminals provide connections for +24 V,Common (0), and GND.6.79(172.5)0.12 (3.1) RTyp.5.2(132.1)Cut Out Dimensions

/ 2

Related manuals for Eaton PXM4K Series