Eaton Power Defense PD-NF Instruction Leaflet

Also see for Power Defense IZMX16: Instruction leaflet Instruction leaflet Instruction leaflet Instructions

Instructional Leaflet IL0131093ENSupersedes May 2015Effective J anuary 2019 Power Defense – ICCBPowerDefense™Instructions for secondary terminalblocksInstructions Apply to:WARNING(1) ONLY QUALIFIED ELECTRICAL PERSONNEL SHOULD BEPERMITTED TO WORK ON THE EQUIPMENT.(2) ALWAYS DE-ENERGIZE PRIMARY AND SECONDARY CIRCUITS IFA CIRCUIT BREAKER CANNOT BE REMOVED TO A SAFE WORKLOCATION.(3) DRAWOUT CIRCUIT BREAKERS SHOULD BE LEVERED (RACKED)OUT TO THE DISCONNECT POSITION.(4) ALL CIRCUIT BREAKERS SHOULD BE SWITCHED TO THE OFFPOSITION AND MECHANISM SPRINGS DISCHARGED.FAILURE TO FOLLOW THESE STEPS FOR ALL PROCEDURESDESCRIBED IN THIS INSTRUCTION LEAFLET COULD RESULT INDEATH, BODILY INJURY, OR PROPERTY DAMAGE.WARNINGTHE INSTRUCTIONS CONTAINED IN THIS IL AND ON PRODUCTLABELS HAVE TO BE FOLLOWED. OBSERVE THE FIVE SAFETY RULES:– DISCONNECTING– ENSURE THAT DEVICES CANNOT BE ACCIDENTALLY RESTARTED– VERIFY ISOLATION FROM THE SUPPLY– EARTHING AND SHORT-CIRCUITING– COVERING OR PROVIDING BARRIERS TO ADJACENT LIVE PARTSDISCONNECT THE EQUIPMENT FROM THE SUPPLY. USE ONLYAUTHORIZED SPARE PARTS IN THE REPAIR OF THE EQUIPMENT.THE SPECIFIED MAINTENANCE INTERVALS AS WELL AS THEINSTRUCTIONS FOR REPAIR AND EXCHANGE MUST BE STRICTLYADHERED TO PREVENT INJURY TO PERSONNEL AND DAMAGE TOTHE SWITCHBOARD.UL489 : PD-RFIEC : PD-RF, IZMX40UL489 : PD-NFIEC : PD-NF, IZMX16