Eaton Power Xpert Gateway 900 Quick Start Manual

Also see for Power Xpert Gateway 900: Quick start guide Installing Installation, operation & maintenance manual

Contents

technical information

3Technical Data TD150022ENEffective October 2017Power Xpert Gateway 900 Advanced ColorTouchscreen Display Quick Start GuideEATON www.eaton.comFigure 7. User accounts.3. If a “user” account does not exist, or if the password needs tobe changed, this can be corrected by clicking on the Edit buttonin the upper right hand corner of the screen.4. If the “user” account does not exist, add it with the Add Userbutton.5. If the password needs to be corrected, select the return thepassword to the default of user by selecting the arrow to pull outthe side-pane and change the password.Figure 8. Updating password.ConnectionsTo use the PXG 900 Advanced Display, provide power through theincluded connector. This display accepts an input from 9-36 Vdc witha maximum power consumption of 60 W.otee:N A power supply must be purchased as it is not supplied with the dis-play. Eaton recommends the following power supplies: PSG60E (85-264 Vacinput); PSG60F (320-575 Vac input).The display’s plug-in terminals provide connections for +V, -V, andfloating ground.Figure 9. Power and COM port connections for the PXG 900Advanced Color Touchscreen Display.Figure 10. Power port connection.The PXG 900 Advanced Color Touchscreen Display requires a USBcable (included with the PXG 900). This connects directly to theUSB Local Configuration port on the PXG 900 and can be pluggedinto either USB port on the display.USB connectionTo DC power supplydisplay power input range:9-36 Vdcminimum 60 W

/ 6

Related manuals for Eaton Power Xpert Gateway 900