Eaton Powerware 9125 Two-in-One UPS 2500 User Manual

Also see for Powerware 9125: Reference guide User guide User guide User guide Installation guide

Contents

EATON Powerware® 9125 Two-in-One UPS (2500/3000 VA) User’s Guide S 164201374 Rev Dwww.powerware.com35Chapter 4 OperationThis section describes:S Turning the UPS on and offS Starting the UPS on batteryS Initiating the self-testS Operating modesTurning the UPS OnAfter the UPS is connected to utility power, it conducts a self-test andenters Standby mode.To turn on the UPS, press the On button on the front panel. Theμ indicator illuminates solid and the bar graph indicators display thepercentage of load being applied to the UPS.Starting the UPS on BatteryTo turn on the UPS without using utility power, press and hold theOn button for at least four seconds. The UPS starts up in Battery modeand supplies battery power to your equipment. When the UPS starts onbattery, it does not conduct a self-test to conserve battery power.