Eaton Powerware 9125 User Manual

Also see for Powerware 9125: Reference guide User guide User guide User guide Installation guide

UPS MAINTENANCEEATON Powerware® 9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev Bwww.powerware.com455. Slide the new battery trays into the chassis.6. Reinstall the battery retaining bracket.7. Replace the lower UPS front cover.Testing New BatteriesNOTE The batteries must be fully charged and the UPS must not be in Battery mode toperform the battery test.NOTE For an accurate battery test, test the UPS with at least 50% load applied to the UPS.To test the new batteries:1. Plug the UPS into a power outlet (apply utility power on hardwiredmodels) for 24 hours to charge the battery.2. After charging the battery, press and hold the button for threeseconds to initiate a battery test.The UPS cycles the bar graph indicators twice, verifies the batteryconverter, and schedules the battery test to occur within 24 hours.