Eaton Powerware 9130 User Manual

Also see for Powerware 9130: User guide Specifications User guide User guide Installation guide

Contents

OPERATIONEaton® 9130 UPS (700–3000 VA) User's Guide 164201718 Rev 2 www.powerware.com 39Table 2 shows the basic menu structure.Table 2. Menu Map for Display FunctionsMain Menu Submenu Display Information or Menu FunctionUPS Status Main status (mode and load) / Notice or Alarm status (if any) /Battery status (state and charge level)Event Log Displays up to 127 events and alarmsThe Event Log is also available through the serial port. See“Retrieving the Event Log” on page 47.Measurements Load W VA / Load A pf / Output V Hz / Input V Hz / Bypass V Hz /Input Line Events / Battery V minControl Go to Bypass Transfers the UPS system to internal Bypass modeWhen this command is active, the option changes to “Go toNormal.”Start Battery Test Starts a manual battery testSee “Testing New Batteries” on page 72.Reset Error State Clears a “Battery Test Failed” alarmLoad Segments Load segment 1: ON | OFFLoad segment 2: ON | OFFThese commands overrule user settings for load segments. See“Configuring Load Segments” on page 49.Restore FactorySettingsReturns all settings to original valuesIdentification UPS Type / Part Number / Serial Number / FirmwareSettings User Settings See Table 3 for details.Service Settings This menu is password-protected.