Eaton VORAD EVT-300 Driver Instructions

Also see for EVT-300: Service manual

10Driver Display IndicatorsRange Control* andAccident Recorder*When rotated from minimum to maximum*, andnot in SmartCruise*, this control knob providesrange adjustment of the first alert (3 to 2 sec-onds) and the second alert (2 to 1.75 seconds).Function may be configured to prevent rangeadjustment control* (See Figure 5). WhenSmartCruise is selected, rotation of the knob,from maximum to minimum, will change the fol-lowing interval from 3.25 to 2.25 seconds. Acci-dent Reconstruction is initiated by pushing andholding this knob for 5 seconds thereby freezingthe most recent event data in half of the allo-cated memory. (See “In Case of an Accident”page 26) (See Figure 5)Red, System Failure Illuminates when a problem has been detectedin the forward looking radar system. A pattern offlashes blink out the faults that are stored inmemory when activated by holding in the vol-ume control knob for five seconds (See “Diag-nostic Features”, page 27). (See Figure 5)Green, SmartCruise*/Accident Reconstruc-tion*Comes on when SmartCruise is enabled andvehicle cruise control has been engaged. If Acci-dent Reconstruction* has been initiated to storeinformation, it will flash 8 times. After systempower-up and power-on LED test is completedand if Accident Reconstruction information waspreviously stored, the display will flash 8 times.(See Figure 5)Light Sensor Photo sensor senses ambient lighting andadjusts intensity of the indicator lights accord-ingly, i.e., increases brightness of indicatorlights in daytime and decreases brightness ofindicator lights during nighttime. (See Figure 5)NOTE: Items marked with an asterisk (*) can be changed (configured), by aTechnician, by using ServiceRanger, a PC-based service support tool.