Eaton i-on Compact Quick Setup Manual

Also see for i-on Compact: User guide Administration and User Manual Administration and User Manual Administration and User Manual

i-on CompactQuick Setup GuideIntroductionThis guide provides a quick overview ofhow to set up standard features of an i-onCompact control unit.Note: Details of all features and options areavailable in thei-on Compact EngineeringGuide, andi-on Compact Admin & UserManual, which you can download fromwww.touchpoint-online.com.Step 1: Power-up the control unitAfter installing all hardware (as described in theInstallationGuide):1. Switch on the mains supply to the control unit.2. Follow the on-screen prompts. When you see the following,enter a four-digit installer access code of your choice, thenenter it again when prompted. DO NOT FORGET THIS CODE!NEW INSTALLER CODE( )3. When you see the following, enter a four-digit access codeof your choice for User 1 (master user) , then enter it againwhen prompted. DO NOT FORGET THIS CODE!NEW USER 1 CODE( )4. The standby screen is displayed. For example:i-on Compact12:00 01/12/2017i-on Compact10:43 03/06/2017