Eaton EWFFSC15 Quick Start Manual

Control your fans from anywhere with Eaton’s Wi-Fi SmartFan Speed Control (EWFFSC15) which replaces standardswitches and features ON/OFF and DIM/BRIGHT control.The Wi-Fi Smart Fan Speed Control (EWFFSC15) can beremotely controlled using the Brightlayer Home App.Eaton’s Wi-Fi Smart Fan Speed Control has additionalfeatures such as a selection of 3 fan speed controls(High, Medium, Low).Your Wi-Fi Smart Fan Speed Control FeaturesQuick StartGuideEATON SMART HOMESingle location installation Operation instructionswww.eaton.comwww.eaton.com/wiringdevicesAmazon, Alexa and all related logos are trademarks of Amazon.com,Inc. or its affiliates. Google and Google Play are trademarks of GoogleLLC. Wi-Fi CERTIFIED logo is a trademark of the Wi-Fi Alliance.Tools neededAdditional system requirementsPhillips-headScrewdriver Wire cuttersPrior to installationRequires neutral for installationWARNINGS AND CAUTIONS:• Turn OFF circuit breaker or remove fuse(s) and test that power isOFF before installation process• Never wire any electrical device with power turned ON Wiringfan speed control HOT may cause permanentdamage to fan speed control and void warranty• If you are not sure about any part of these instructions, pleasecontact a licensed electricianCAUTION• Use only with 120V/AC 60Hz• Do not exceed maximum rating of fan speed control asindicated on the device• Must be installed and used in accordance with allnational and local electrical codes• If a bare copper or green ground connection is notavailable in the wallbox, contact a licensed electricianfor installation• Use only #14 or #12 copper wire rated for at least 75ºC with thesedevicesDO NOT USE WITH ALUMINUM WIREIMPORTANT: Wi-Fi Smart Fan speed control (EWFFSC15) willnot work or will be damaged if wired incorrectly and warranty willbe voided. Refer to wiring instructions provided.NOTE: The Wi-Fi Smart Fan speed control (EWFFSC15) iswired directly to the ceiling fan fixture.End User license agreement• Press ON button to turn fan ON at previously selected level• Press the OFF button to turn the fan OFF• The bottom LED indicates the fan speed controlleris turned ON• When fan is OFF, press and hold the ON button for 2 secondsuntil LED blinks green for full fan speedFACTORY RESET: The fan speed controller can be reset which willexclude the device from its network and restore all factory defaults.• Turn ON the fan speed controller• Press and hold the ON button for 30 seconds until the LED indicatorblinks red• Release the button• LED indicator will start flashing fast while it is being reset• The LED indicator will then start blinking magenta at a normal rateindicating the fan speed controller is not part of a Wi-Fi networkScan for more advanced featuresincluding adjusting the brightness levelof the LED indicators and additionalwiring configurationsFor color change kit installationinstructions, see back pageSoftware included with the Eaton product is herebylicensed to you, and Eaton retains for itself (or, if applica-ble, its suppliers) all title and ownership to any softwaredelivered hereunder. Without Eaton’s authorization, you shallnot copy, disclose or display the software, or otherwise makeit available to others, and shall not attempt any sale, transfer,sublicense, reverse compilation or disassembly or redistribu-tion of the software. By using the software, you agree to theterms of Eaton’s End User license agreement at:https://www.eaton.com/WiFiSmartEULATools required for installation (not included) for theWi-Fi Smart Fan speed control (EWFFSC15):A 2.4GHz Wi-Fi network withhigh-speed internetIOS 12.0 or later or Android 8.0 or latermobile device. Note: Must beconnected to Wi-Fi and BluetoothA Brightlayer Home account set-upthrough the Brightlayer Home AppCan be wired with standard 3-way switch where travelerwire exists for 3-way.Black HotLoad120VGroundGreen Wi-Fi FanSpeed ControlNeutralNeutralCeilingFanSet up and controlin the BrightlayerHome AppVoice controlwith Alexa andHey GoogleEasyinstallation No hubrequired Set schedules,groups, andscenesEIS-0279-E (REV. D)Smart Fan Speed ControlEWFFSC15Fan Speed Controller Rating - EWFFSC15Load Type Single GangEWFFSC15 Ceiling fan 1.5ANeutral is requiredSingle pole & 3-way 3 Preset fan speedsHigh, Medium, Low StatusindicatorAir gapswitchON buttonOFF buttonPress tospeed upPress toslow downLED speedlevel indicatorStatusindicatorEaton's Wi-Fi Smart DevicesEaton’s broad selection of Wi-Fi Smart Devices offer reliability with unbeatable ease of setup.Every device sets up quickly and easily with the Brightlayer Home App–no hubs or controllersare necessary. You can add voice-control using any Alexa or Google device.For more information on the complete Wi-Fi smart product portfolio please visit Eaton.com/smarthomeEWFD30 EWFSW15 EWFTRCR15 EWACD EWFFSC15Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc.or its affiliates. Google and Google Play are trademarks of Google LLC.Wi-Fi CERTIFIED logo is a trademark of the Wi-Fi Alliance.Contact us:Eaton.com/chatwww.eaton.com/smarthomeTechSupport@eaton.comPhone (Toll Free): 877-386-2273Device support: Option 5 then Option 3App support: Option 2 then Option 9Fax (Toll Free): 800-329-3055

/ 3

Related manuals for Eaton EWACD