Eaton i-on16 Administrator's And User Manual

Also see for i-on16: Quick user guide Installation guide

Contents

3. Setting and Unsetting i-on16Page 20b. Either key in your access code.As you key in your code thedisplay shows a “*” for each digit.OR present your tag.Quick Set:In a part setting system, quick set removes the need to use an access codeor tag to start setting. The installer must enable this facility for you. (Notethat in order to make the alarm system comply with certain regulations theinstaller may not be allowed to provide this facility.)Do this: The display shows:a. Press A, B, C or D.The system starts the exitprocess, there is no need to selectwhat to set. Go to: 3. FinishingSetting.2. Selecting What to Set:Do this: The display shows:The bottom line of the displayshows the first item in the settingoptions menu.↕a. Press  or  to select the optionyou want.The bottom line of the displayshows each item from the rest ofthe menu in turn.↕3. Finishing SettingDepending on how your installer has programmed your system, you willneed to take one of the following actions to complete setting the system.Note that you will need a special button fitted in order to use Exit TerminateSet, and a special lock fitted to use Lock Set.