Eaton i-on16 Administrator's And User Manual

Also see for i-on16: Quick user guide Installation guide

Contents

i-on16 4. AdministrationPage 61The bottom line of the displayshows the users owning each proxtag, for example:If the control unit does notrecognise a prox tag, the displayshows:9. Press  to end the test. Starting a Test CallIf your control unit has a suitable communications module fitted then theInstaller or the Alarm Receiving Centre may ask you to start a test call. Thiscould be in order to check that the control unit and communications moduleare working correctly or to help clear a communications alert. Your controlunit will have two pre-programmed telephone numbers. When the Installeror ARC ask you to make a test call they will tell you which number to use.To make a test call:1. Make sure the display shows thestandby screen.2. Press . 3. Key in your access code (orpresent a tag). 4. Press  until you see:. 5. Press .The display shows:6. Press  until you see: 7. Press .The display shows the first of twotelephone numbers that the controlis already programmed to call.8. Press  or  to select the phonenumber you have been asked totest.