Eaton menvier40 Installation Manual

Also see for menvier100: Quick user guide

Menvier40/100 Before You BeginPage 7i-kp01 Controls and Displays234658711. LCD display (2 x 20 characters).2. Programming keys.3. Navigation keys4. Alert LEDs5. Setting and unsetting keys.6. Programmable HUA keys.7. Number/text keys.8. Set/Unset LEDs.Figure 5 Controls and DisplaysOpening the i-kp01 KeypadNote: For EN50131-3:2009, 8.7 the keypad is atype B ACE, fixed.To open the keypad first gently prise off the trimon the front and remove the two screws. Next,carefully lever the front of the keypad (containingthe PCB and display) away from the keypad rearhousing.1234Figure 6 Opening the Keypad243311. Central keyhole.2. Rear tamper shroud.3. Cable entry.4. Fixing holes.Figure 7 Keypad Rear Housing1. Sounder.2. Sounder volume control.3. Tamper switch.4. Jumpers for LED function:5. RS485 termination jumper6. Connector for control unit (note that the ETterminals are inactive).Figure 8 i-KP01 Keypad PCB