Ebyte E103-W01-IPX User Manual

Contents

Ebyte E103-W01-IPX User Manual Manual pdf 17 page image

Chengdu Ebyte Electronic Technology Co., Ltd. E103-W01-IPX User ManualCopyright ©2012–2018，成都亿佰特电子科技有限公司 169【Exit transparent transmission】：Send “+++” to exit transparent transmission mode and re-enter AT mode.After exiting transparent transmission mode, user can use AT command to exit transparent transmission onpower-up mode. See below,Click “exit transparent transmission” (send “+++” without line break) to enter AT command mode. Click“turn off transparent transmission” to see below interface.After the configuration, module will not works at transparent transmission mode automatically afterrebooting.5.2 Module build TCP SERVER to connect to PC as APNo Remarks1In factory mode, module’s IP address is 192.168.4.1 when act as AP.Check network status of PC, see below information means the connection between PC and module is ok.AT command can be used to restore the factory state if user ever changed module’s parameter.