|
Chengdu Ebyte Electronic Technology Co., Ltd. E103-W01-IPX User ManualCopyright ©2012–2018，成都亿佰特电子科技有限公司 267 AT commandOnly list some special AT command for your reference, more AT command please refer to the official datasheet.1AT+EBPWM-PWM Set or modifyT+EBPWM=,,[,ty1>][,][,]Parameter specification：channel_num：channel numberperiod：cycle（1000~10000correspondingto1~10ms）duty0~duty3：PWM0~PWM3Duty cycle setting（high level time=duty*45ns）Duty number should keep the same with channelnumber.Response:First transmission response：PWM Start!Non-first transmission response：OKError response：ERRORExample: Set PWM0 duty cycle 25% PWM1 duty cycle 50% cycle 10msAT+EBPWM=2,10000,55555,111111Notes：PWM cannot be closed after booting, and channel number cannot be modified.2AT+EBIOGET to get IO input statusAT+EBIOGET=Parameter specification：gpio_num：GPIO number, 4,5,12,13 and 14 areavailable.Response：0 or 1OKExample：AT+EBIOGET=4Notes： The pins which could been used to be the PWM output, is not suitable for this command.3AT+EBIOSET to configure IO output statusAT+EBIOSET=，Parameter specification：gpio_num：GPIO number, 4,5,12,13 and 14 areavailable.Value: Pin status can be configure to 0,1Response：OKExample：AT+EBIOSET=4，1Notes：The pins which could been used to be the PWM output, is not suitable for this command.4AT+EBADC to get ADC valueAT+EBADCParameter specification：Range of input voltage：DC 0.0V~1.0VResponse：45（real voltage=45/1024）OKExample：AT+EBADC5 AT+EBSTATE register GPIO13 as Wi-Fi indicator
|
