Ebyte E70 Series User Manual

Ebyte E70 Series User Manual Manual pdf 27 page image

CC1310 Wireless Module E70 Series User ManualCopyright ©2012–2017, Chengdu Ebyte Electronic Technology Co., Ltd. 27 / 34in some cases, it may need external pull-up resistor.1 TXD、AUX open-collector outputs, RXD open-collector inputs1 0 transmission power (approximation)  The external power must ensure that the ability of currentoutput is more than 1A and the power supply ripple iswithin 100mV. Low power transmission is not recommended due to itslow power supply efficiency.0 0 14dBm (Default)0 1 10dBm1 0 7dBm1 1 4dBm1 0 transmission power (approximation)  The external power must ensure that the ability of currentoutput is more than 1A and the power supply ripple iswithin 100mV. Low power transmission is not recommended due to itslow power supply efficiency.0 0 30dBm (Default)0 1 27dBm1 0 24dBm1 1 21dBmFor example: The meaning of No.3 "SPED" byte：The binary bit of the byte 7 6 5 4 3 2 1 0The specific value(configured by user) 0 0 0 1 1 0 1 0Meaning UART parity bit 8N1 UART baud rate is 9600 Air data rate is 2.4kCorresponding hexadecimal 1 A8.Parameter SettingWhen the module is in Mode 3 (M0=1 M1=1 M2=0) or Mode 5 (M0=1 M1=0 M2=1), the parameter can be set by instruction or softwarein PC. Please visit www.cdebyte.com to download the software.9.Secondary DevelopmentE70 series have built-in CC1310 SoC chip. Users can conduct the development according to pin description below. Meanwhile, Ebytecan develop the customized software for customers. Please contact us for more details.