Ebyte E810-DTU User Manual

Also see for E810-DTU: User manual User manual User manual User manual User manual

Ebyte E810-DTU User Manual Manual pdf 20 page image

Chengdu Ebyte Electronic Technology Co.,Ltd E810-DTU(CAN-ETH) User ManualCopyright ©2012–2019, Chengdu Ebyte Electronic Technology Co.,Ltd 204.1.4. DNS introductionDNS is called Domain Name System. The mutual mapping of domain names and IP addresses on the World WideWeb (www) is the database. After the device has the correct DNS server, it can interact with the external network (WorldWide Web) server through the network domain name.4.1.5. Data packing mechanismBecause the data of the network end is transmitted by data frame, it is necessary to send the frame data of CAN tothe network end, so that the data can be transmitted more efficiently and quickly.Serial port packing time: The default is 10ms, which can be set from 0 to 1000.Serial port packing length: The default is 1000 bytes, which can be set from 0 to 1000.Note:When both of the parameters are not 0, C based on the rules which any of them are satisfied;When one parameter is 0, the packing rule will be another non-zero value;When both parameters are 0, the packing rule is the default parameter value: 10ms/1000 bytes.4.1.6. SOCKET functionE810-DTU (CAN-ETH) can establish two Sockets, respectively Socket A1, Socket B1.Socket A1 support TCP Client、TCP Server、UDP Client、UDP Server ect. All types. Socket B1 only support TCPClient、UDP Client、UDP Server.Two Sockets can connect to different networks for data transmission at the same time.4.1.7. TCP Client function(1)TCP Client provides client connection for TCP network services. It proactively initiate a connection request tothe server and establish a connection for interaction between serial data and server data.According to the relevantprovisions of the TCP protocol, the TCP Client has the difference of connection and disconnection to ensure reliableexchange of data. It is commonly used for data interaction between devices and servers.(2)When E810-DTU (CAN-ETH) attempts to connect to the server in TCP Client mode and the local port is 0, itinitiates the connection with random ports each time.(3)This mode supports short connection function.(4)In the same LAN, if the E810-DTU (CAN-ETH) is set to static IP, please keep the IP of E810-DTU (CAN-ETH)and gateway in the same network segment, and set the gateway IP correctly, otherwise the normal communication willnot be possible.