Be sure the heads of screws are protruding slightly from the mountingsurface.3. Slide the i.LON 10 Ethernet adapter onto the screws. You may need toadjust the screws into or out of the wall slightly to assure a secure mounting.i.LON 10 Hardware SpecificationsOperating InputVoltagePower line: 12.5 VDC provided by LONW ORKSenabled power supply such as Tamura model#425x12400PFree topology: 9VDCOperating InputCurrent270 mA Model 72010400 mA Model 72011OperatingTemperature Range0° C to +50° COperating HumidityRange25 to 90% RH @ 50° CNon-operatingHumidity Range95% RH max @ 50° CEMC FCC Part 15 Class B, ICES-003 Class B, EN55024,EN 55022 Class B, VCCI Class B, C-TickAgency Listings UL 60950, CSA C22.2 No. 60950, EN60950, CEFCC Compliance Statement – Class BThis equipment has been tested and found to comply with the limits for a Class Bdigital device pursuant to Part 15 of the FCC Rules. These limits are designed toprovide reasonable protection against harmful interference in a residentialinstallation. This equipment generates, uses, and can radiate radio frequencyenergy and, if no installed and used in accordance with the manufacturer’sinstruction manual, may cause interference with radio communications.However, there is no guarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off andon, you are encouraged to try to correct the interference by one or more of thefollowing measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and the receiver.• Connect the equipment into an outlet on a circuit different from that whichthe receiver is connected.• Consult the dealer or an experienced radio/television technician for help.Changes or modifications not expressly approved by the party responsible forcompliance could void the user’s authority to operate the equipment.i.LON 10 Ethernet Adapter User’s Guide 2-7