The i.LON 10 Ethernet Adapter General ConfigurationPageYou can access the i.LON 10 Ethernet Adapter’s General setup page by pointingyour browser to 192.168.1.222 and clicking the Setup link. If you are unable toaccess the i.LON 10 Ethernet Adapter’s web pages, ensure that:• The PC is on the same subnet as the i.LON 10 Ethernet Adapter. By default,the IP address of the i.LON 10 Ethernet Adapter is 192.168.1.222. The IPaddress is reset to this value whenever a security access reset (seePerforming a Security Access Reset in Chapter 5) is performed. See the i.LON10 Ethernet Adapter Quick Start Guide for a step-by step description of howto configure the i.LON 10.• If Internet Explorer is configured to use a proxy server, set the BypassProxy Server for Local Addresses option. You can access proxy serveroptions in Internet Explorer 6.0 by opening the Tools menu, then clickingOptions, then selecting the Connections tab of the Options dialog, andthen clicking LAN Settings on the Connections tab.This General setup page appears as shown in the following figure:If you are unable to access this page, verify that if your PC is on the same subnetas the i.LON 10. To access this page in non-secure mode, the HTTP Accessoption on the security page must be selected. See i.LON 10 Ethernet AdapterSecurity Web Page in Chapter 5 for more information).3-2 Using i.LON 10 Ethernet Adapter with a 10BaseT Connection
