32CS-310WINTER OPERATIONUse the winter plug to prevent carburetor trouble inwinter.• Release the cylinder cover latches and remove cylin-der cover. Remove plug from warm weather position,and install into cold weather “storage” position.NOTEFor operation at normal temperature return the plugto its original place. (5°C, 41°F)It causes over heating of the engine.PlugCylindercoverWarm weatherpositionCold weather“storage” positionSTORAGE AFTER USEWARNINGDo not store in an enclosure where fuel fumes mayaccumlate or reach an open flame or spark.CAUTIONDo not lend or rent your chain saw without theInstruction manual and Safety manual.NOTE• For future reference, you should keep this Instructionmanual and the Safety manual.• If this Instruction manual or the Safety manual hasbecome illegible or is lost, please purchase a newone from your ECHO dealer.• Inspect and adjust every part of the chain saw.- Completely clean every part and repair if neces-sary.- Apply thin coating of oil on metal parts to preventrust.• Remove chain and guide bar.• Drain fuel tank completely. Press purge bulb 6 - 7times to remove remaining fuel from carburetor thendrain the tank again. Close choke, start and run theengine until it stops due to lack of fuel.• Allow engine to cool then remove the spark plug andpour 7 cc (1/4 oz.) of fresh, clean, two-stroke engineoil into the cylinder through the spark plug hole.• Store in a dry area, free from dust.