ASSEMBLY PAS-225 VP18 X7732274200© 5/2017 ECHO Inc.Shield with cutoff knife is for use with the Nylon Line Head only.Install shield without cutoff knife when using plastic or metalblades, or serious injury may result.1. Place the shield on the bottomof the bearing housing flange.2. Place shield plate (B) on shield,align holes. Install three (3)screws from bottom throughplate and shield into gear case.3. Assemble adapter plate (C)onto PTO shaft (A).Nylon Line Head InstallationWear Gloves or personal injury may result:◆ Cutoff knife is sharp.◆ Gearcase and surrounding area may be hot.Parts Required: Nylon Line Head.ABC
